Zero-VOC Floor Finishing Systems for NJ and NYC Homes, Explained
Posted November 10, 2026
A plain-English guide to Go Green's four zero-VOC finishing systems for homes in New Jersey and New York City, and how to pick the right one.
Planning a project? Call 908-232-6600 or book a virtual consultation.
The finish you choose decides how your floor looks, how it feels underfoot and how you care for it for years. It also decides what goes into the air in your home while the work is done. Go Green Wood Floors specializes in zero- and low-VOC finishes for homes across New Jersey and New York City.
Go Green offers four main finishing systems: the Platinum Package, the Diamond Package, the Single Coat System and Vermeister ZERO VOC. Each one is described on our sanding and finishing page. Here is how they differ, in plain terms.
Why Zero VOC Matters

VOCs are volatile organic compounds. According to the EPA, exposure to VOCs can cause headaches, dizziness and irritation of the eyes, nose and throat, and longer-term exposure has been linked to effects on the liver, kidneys and nervous system. Green building programs such as LEED cap the VOC levels allowed in finishes. That is why Go Green focuses on zero- and low-VOC systems, and all four systems in this guide are described as zero VOC. Read more on our eco-friendly finishes page, or see our post on the health benefits of wood floors.
Platinum Package: L'Atelier Naturel Oil

The Platinum Package is the one Go Green calls its Family Favorite. The floors are sanded bare and restored to new-like condition, then finished with a color you choose from the L'Atelier Naturel Oil collection. The collection includes hard wax oils, natural oils and water-based products, imported from Italy and Belgium, with 40 oil colors that can be combined with pre-treatments. The oil protects and enhances the wood in one layer by reacting with the wood's cellulose fibers. It is a good fit if you want a wide choice of colors in a zero-VOC oil. Browse colors such as Noyer in our shop.
Diamond Package: VitaNordic

The Diamond Package, called the Designer and Architect Favorite, uses the VitaNordic refinishing system and offers unlimited customizations. It adds pre-treatments such as lyes, reactive stains and pre-colors, which can be layered under the oil to reach a specific look. VitaNordic products are plant-based, with no artificial pigments or preservatives. Cold-pressed vegetable oils and hardening oils penetrate the wood and harden it, and small scratches and dents tend to show less than they would on a urethane finish. This system suits projects where an architect or designer is matching a precise color. See an example in Diamond Oil with White Lye.
Want help with your own floor? Book a virtual consultation with a Go Green wood floor specialist.
Single Coat System: One and Done

The Single Coat System is Go Green's One and Done Package. The floors are sanded bare, and one coat of natural oil both colors and protects the wood. The oil is zero VOC, made with renewable materials and imported from Europe, and it has a built-in hardener for strong chemical and wear resistance. The result is a rich matte finish that brings out the natural grain. For rooms with heavy traffic, the floor can also get an additional sealer coat for more surface protection and longer maintenance intervals. Colors range from light tones such as Bianco to deep tones such as Fango.
Vermeister ZERO VOC Polyurethane

Vermeister ZERO VOC is the choice for people who want a water-based polyurethane rather than an oil. It is a completely solvent-free, water-based aliphatic polyurethane, made partly from renewable raw materials. It can be used as a single component, or as two components after adding ZERO VOC BOOST. Applied directly to the wood, it does not alter the shade, so the floor keeps a very natural look. It comes in matte or satin. Water-based finishes also tend to dry faster, and a water-based refinishing job is often about 2 days, compared with 3 to 4 days plus drying time for oil-based work. See Sanding and Finishing with Vermeister ZERO VOC.
How to Choose

Start with the look you want. If you want to pick from a large palette of oil colors, the Platinum Package offers 40. If you are matching a specific design with lyes or pre-colors, the Diamond Package allows unlimited customizations. If you want color and protection in one matte coat, the Single Coat System is built for that. If you want the wood's own shade under a water-based finish in matte or satin, Vermeister ZERO VOC fits. Then think about care, since each finish has its own maintenance routine. Go Green also maintains Rubio Monocoat, WOCA, Osmo and Ciranova floors. Compare all of them on our packages page.
Have a question about your project? Call 908-232-6600 or book a virtual consultation.
Quick Answers
Are Go Green's finishing systems zero VOC?
Yes. The Platinum, Diamond, Single Coat and Vermeister ZERO VOC systems are all described as zero VOC.
Which finishing system has the most color choices?
The Platinum Package offers 40 L'Atelier Naturel Oil colors, and the Diamond Package offers unlimited customizations with pre-treatments.
Which finishes give a matte look?
The Single Coat System gives a rich matte finish, and Vermeister ZERO VOC comes in matte or satin.
Is an oil or water-based refinish faster?
Water-based work is often about 2 days. Oil-based work often takes 3 to 4 days plus drying time. Larger jobs take longer.
Plan Your Floor
Not sure which finish fits your home? Call 908-232-6600, email joe@hugginsflooring.com or book a virtual consultation. Browse our sanding and finishing packages, finishes and eco-friendly finishes.
About The Author
Joe Avila has worked in wood flooring for 26 years. He is NWFA certified (CSI, CI, CWFI, CFS) and teaches NWFA continuing-education courses for architects, designers and flooring professionals. Go Green Wood Floors, a Huggins Wood Floor Specialist brand.
.png)




Comments