top of page

Walnut Double Herringbone Floors for Glen Ridge, NJ Homes

Nov 14
5 min read

Updated: 3 days ago

Posted November 14, 2026

American black walnut herringbone floor, design render
American black walnut herringbone, design render. Shown: Unfinished American Walnut Double Herringbone Solid.

What to know before planning a walnut double herringbone floor in a Glen Ridge home, from borders and sizes to milling and finishing.

Planning a project? Call 908-232-6600 or book a virtual consultation.

Glen Ridge is a small borough in Essex County, New Jersey, known for the gas lamps that still light many of its streets. Much of the borough is a historic district, and many of its houses, built in the late 1800s and early 1900s, range from Victorian to Colonial Revival and Tudor-style homes, often with formal entry halls, living rooms and dining rooms.

In homes like these, a patterned wood floor feels right at home. Go Green Wood Floors serves Glen Ridge and the surrounding Essex County area, and sells unfinished double herringbone flooring in four species, including American walnut. Here is what to know before you plan a walnut herringbone floor.

Why Walnut for a Herringbone Floor

American black walnut herringbone floor, design render
American black walnut herringbone, design render. See our walnut double herringbone.

Go Green's double herringbone flooring comes in white oak, red oak, maple and American walnut, and walnut is the darkest of the four. American black walnut is known for its rich brown color, which gives a herringbone pattern a warm, formal look, especially in a dining room, library or entry hall. Because a herringbone floor is made of many short pieces set at angles, the color and grain of each piece shift with the light, so the pattern reads a little differently from one end of the room to the other. Our white oak vs red oak vs walnut guide compares the species in more detail.

Borders and Configurations

American black walnut chevron floor, design render
American black walnut chevron, design render. Explore our wood flooring.

Go Green's product pages note that herringbone has a rich history as a traditional floor pattern in Europe, and that it can be installed in several configurations, with or without a border. A border frames the pattern and gives a room a finished edge, which suits the formal rooms found in many older Glen Ridge homes. Chevron, also called French herringbone, is a popular variation. The flooring is supplied as pre-cut, tongue and groove, unfinished pieces that can be assembled on site in different configurations, so the layout can be planned room by room. Our herringbone vs chevron post explains the difference between the two patterns.

Choosing a Size

Rustic grade walnut herringbone floor for comparison, design render
American black walnut herringbone in rustic grade, shown for comparison, design render. See our walnut double herringbone.

Go Green's walnut double herringbone is offered in 20 sizes, from 2 1/4 x 11 1/4 inches up to 6 x 36 inches. Widths come in 2 1/4, 3, 4, 5 and 6 inches, each in several lengths. Narrow pieces make a busier, more detailed pattern, while wider and longer pieces give a bolder look with fewer joints. In a smaller room or a hallway, a narrower size keeps the pattern in proportion, and in a large living or dining room a wider size can suit the scale of the space. A Go Green specialist can help you choose during a virtual consultation.

Want help with your own floor? Book a virtual consultation with a Go Green wood floor specialist.

Solid or Engineered

American black walnut plank floor, design render
American black walnut plank, design render. See our walnut double herringbone, 2-layer engineered.

The standard option is solid wood, 3/4 inch thick. The walnut herringbone is also available as 2-layer engineered, in 3/4 or 5/8 inch thickness, or as 3-layer engineered. Go Green's product page suggests engineered floors as an option for radiant heated floors, and rift and quartered sawn wood for radiant heat, a more formal look or installation over concrete. In an older house with wood subfloors, solid is the usual choice, while an addition, a lower level or a room with radiant heat may call for engineered. Our engineered vs solid hardwood guide covers the trade-offs.

Made to Order and Precisely Milled

Wood flooring in a hallway and stairs
Wood flooring in a hallway and stairs. See our walnut double herringbone.

Every Go Green herringbone floor is made to order, one at a time, to your specifications. The product pages explain why milling matters more with herringbone than with any other pattern: if the widths of the pieces do not add up exactly, the pattern becomes impossible to maintain across the room. Go Green uses laser-guided precision equipment and keeps the tolerance for dimensional deviation to no more than .005 inch in the width or profile of any one piece. The flooring is unfinished, Select and Better grade, and sold in full bundles, with a minimum order of 200 square feet. Our Select and Better grade guide explains the grade.

Finishing a Walnut Floor

Because the flooring is unfinished, it is sanded and finished on site after installation. Go Green specializes in zero and low VOC finishes. To keep walnut's own color, Vermeister ZERO VOC is a water-based finish in matte or satin that does not alter the wood's shade. To deepen or warm the color, zero-VOC oils from the L'Atelier Naturel Oil collection, such as Chocolat, or Single Coat colors such as Marrone Inglese color and protect the wood in one layer. Go Green's Glen Ridge page recommends laying samples on your own floor, so you can see the result before the whole floor is finished.

Have a question about your project? Call 908-232-6600 or book a virtual consultation.

Quick Answers

What species does Go Green's double herringbone come in?

White oak, red oak, maple and American walnut.

What sizes is the walnut herringbone available in?

20 sizes, from 2 1/4 x 11 1/4 inches to 6 x 36 inches.

Is it solid or engineered?

Solid 3/4 inch is standard. 2-layer and 3-layer engineered are also available.

Does Go Green work in Glen Ridge?

Yes. Go Green serves Glen Ridge and the surrounding Essex County area.

Plan Your Floor

Planning a walnut herringbone floor for your Glen Ridge home? Call 908-232-6600, email joe@hugginsflooring.com or book a virtual consultation. See our walnut double herringbone, finishes and eco-friendly finishes.

About The Author

Joe Avila has worked in wood flooring for 26 years. He is NWFA certified (CSI, CI, CWFI, CFS) and teaches NWFA continuing-education courses for architects, designers and flooring professionals. Go Green Wood Floors, a Huggins Wood Floor Specialist brand.

Related Reading

Comments


bottom of page