Double Herringbone Floors for Upper East Side Apartments
Posted November 10, 2026

How to plan a double herringbone wood floor for an Upper East Side apartment, from species and construction to sizes, milling and finish.
Planning a project? Call 908-232-6600 or book a virtual consultation.
The Upper East Side is full of formal rooms that suit a patterned floor: entry foyers, long living rooms and dining rooms in prewar apartment buildings and townhouses. Many of these homes already have older strip or parquet floors, and owners who renovate often want a pattern that feels at home with that history.
Double herringbone is one way to get there. Go Green Wood Floors sells unfinished double herringbone in four species and three constructions, and finishes floors with zero- and low-VOC systems. Here is what to know before you choose one for your apartment.
Why Herringbone Suits Upper East Side Rooms

Herringbone has a rich history as a traditional European pattern, which is part of why it looks natural in the classic rooms found across the Upper East Side. A double herringbone pairs two boards side by side in each step of the zigzag, so the pattern reads a little bolder and more open than a single herringbone. The pattern can be installed in several configurations, with or without a border. A border can frame a foyer or dining room, while running the pattern wall to wall keeps a long living room feeling continuous. See our double herringbone guide for more on the pattern itself.
Choosing a Species

Go Green's double herringbone comes in four species: White Oak, Red Oak, American Walnut and Maple. White oak is offered in plainsawn, rift, quartered, rift only and quartered only cuts, which gives you control over how much grain movement shows in the pattern. Walnut brings a deeper brown tone to a formal room, while maple and white oak start lighter. Because every board is unfinished, the final color comes from the finish you choose on site, so the species decision is mostly about grain and the base tone you want to build on.
Solid or Engineered in an Apartment

The standard double herringbone board is 3/4 inch solid wood, and Go Green also offers 2-layer engineered and 3-layer engineered versions. That choice matters in Manhattan, where many apartment buildings have concrete subfloors and some homes have radiant heat. For radiant heat, a more formal look, or installation over concrete, Go Green suggests rift and quartered white oak, and engineered boards are another option over radiant heat. Our post on wood floors over concrete in NYC apartments covers the subfloor side in more detail.
Want help with your own floor? Book a virtual consultation with a Go Green wood floor specialist.
Sizes and Layout

Double herringbone boards come in sizes from 2 1/4 by 11 1/4 inches up to 6 by 36 inches, in 2 1/4, 3, 4, 5 and 6 inch widths. Size changes the character of the floor. Smaller pieces create a finer, busier pattern that can suit a compact foyer or study, while longer, wider pieces make each zigzag larger and calmer, which can suit an open living and dining room. In a typical Upper East Side apartment with several connected rooms, it helps to decide early whether the pattern will run through every room or stop at doorways, since that affects layout and borders.
Why Milling Matters for Herringbone

Proper milling matters more for herringbone than for any other pattern, because every board has to meet its neighbors at the same angle across the whole room. Small errors add up and show as gaps or a pattern that drifts. Go Green's double herringbone is milled on laser-guided precision equipment, with a dimensional tolerance of no more than .005 inch in width or profile. The boards are Select and Better grade and arrive unfinished, so they are sanded flat and finished after installation. That on-site finishing also lets the pattern and the finish color be judged together in the room's own light.
Ordering and Finishing

Double herringbone is sold in full bundles, with a minimum order of 200 square feet. Once it is installed, the floor is finished on site. Go Green specializes in zero- and low-VOC finishes, including the Platinum Package with L'Atelier Naturel Oil in 40 colors, the Diamond Package with VitaNordic pre-treatments, the Single Coat System and Vermeister ZERO VOC, a water-based finish in matte or satin. For apartment work, ask about the dust extraction system, which sends sanding dust straight outside and takes care of 90 to 95 percent of it. Explore the options on our finishes page.
Have a question about your project? Call 908-232-6600 or book a virtual consultation.
Quick Answers
What species does Go Green offer in double herringbone?
White oak, red oak, American walnut and maple, each in solid, 2-layer engineered or 3-layer engineered construction.
What sizes does double herringbone come in?
From 2 1/4 by 11 1/4 inches up to 6 by 36 inches, in 2 1/4, 3, 4, 5 and 6 inch widths.
Is there a minimum order for double herringbone?
Yes. It is sold in full bundles with a minimum order of 200 square feet.
Which double herringbone works over concrete or radiant heat?
Go Green suggests rift and quartered white oak for concrete or radiant heat, and engineered boards are another option over radiant heat.
Plan Your Floor
Planning a pattern floor for your apartment? Call 908-232-6600, email joe@hugginsflooring.com or book a virtual consultation. Browse our white oak double herringbone, finishes and eco-friendly finishes.
About The Author
Joe Avila has worked in wood flooring for 26 years. He is NWFA certified (CSI, CI, CWFI, CFS) and teaches NWFA continuing-education courses for architects, designers and flooring professionals. Go Green Wood Floors, a Huggins Wood Floor Specialist brand.
.png)



Comments