Select and Better Grade Wood Flooring, Explained
Posted November 13, 2026
What the Select and Better label on Go Green's unfinished flooring means, and how grade works together with cut, pattern and finish.
Planning a project? Call 908-232-6600 or book a virtual consultation.
When you shop for unfinished wood flooring, the grade is one of the first details on the product page, and it is easy to skim past. Grade describes how the boards look: how much natural character, such as knots, mineral streaks and color variation, they are allowed to show.
Go Green Wood Floors lists its unfinished plank, herringbone and chevron flooring in Select and Better grade. Our earlier post on select vs character grade compares the two looks. This guide focuses on what Select and Better means on Go Green's own products and how it works together with the other choices you make.
What Select and Better Means

Select and Better is a grade label for a bundle of boards. It means the flooring is at least Select grade, and some boards may be of a higher, cleaner grade. In practice, a Select and Better floor has a clean, consistent look, with limited knots and character marks. Go Green's product pages describe the unfinished flooring as Select and Better grade, 3/4 inch thick, and the 4 inch rift and quartered plank page notes that you can call about other grades. So if a more rustic look is what you want, ask during your consultation rather than assuming it is not available.
Similar to Clear Grade

Go Green's product page says its Select grade is similar to the Clear grade specified by NOFMA and NWFA, the industry groups whose grading rules many flooring makers follow. Clear is the cleanest-looking grade in those rules, so the comparison tells you that Go Green's Select boards sit near the top of the scale for a uniform look. The page also says the custom-milled plank flooring exceeds NOFMA and NWFA specifications. For a buyer, this is a useful way to compare flooring, because grade names are not always used the same way, and a reference to the industry standard makes the description clearer.
Inspected for Knots and Sap

Grade is not only a label; it depends on how the boards are checked. Go Green's plank flooring is produced on German-made precision molders, with both human and machine inspection for knots and sap. Sapwood is the lighter wood near the outside of the log, and limiting it helps keep the color of a floor even. Every plank is also back-channeled. The moisture content is between 6.5 and 8.5 percent, and no more than 9 percent in any single board. Together, these checks help make sure the look you choose on the product page is the look you get when the boards are installed and finished.
Want help with your own floor? Book a virtual consultation with a Go Green wood floor specialist.
Grade in Herringbone and Chevron

Patterns put grade to the test. In a herringbone or chevron floor, short pieces meet at angles across the whole room, so an odd board can stand out more than it would in a long plank floor. Go Green's double herringbone and chevron flooring is also listed in Select and Better grade, 3/4 inch thick, with solid wood as the standard option and engineered also available. The product pages note that milling matters more with herringbone than with any other pattern, and Go Green keeps the tolerance for dimensional deviation to no more than .005 inch in the width or profile of any one piece. Our herringbone buyer's guide covers pattern choices.
Grade Is Not the Same as Cut

Grade and cut are two separate choices. Grade describes how much character the boards show. Cut describes how the log was sawn, which sets the grain pattern. Go Green's white oak herringbone comes in plainsawn, rift, quartered, rift only and quartered only. A Select and Better floor can be plainsawn, with its arching grain, or rift and quartered, with its straight, linear grain. Go Green suggests rift and quartered for radiant heated floors, a more formal look, or installation over concrete. Our guide to rift and quartered vs plainsawn white oak explains the difference in more detail.
Grade and Your Finish

Because Go Green's flooring is unfinished, the boards are sanded and finished on site, and the finish changes how the grade reads in a room. A clean Select and Better floor suits a natural look, such as Vermeister ZERO VOC, a water-based finish in matte or satin that does not alter the wood's shade. Its even color is also a good base for oils, whether you choose a pale tone from the L'Atelier Naturel Oil collection or a deeper brown, and pre-treatments such as lyes open up even more looks. Custom samples laid on your own floor show how your boards and your chosen finish look together before the whole floor is done.
Have a question about your project? Call 908-232-6600 or book a virtual consultation.
Quick Answers
What does Select and Better grade mean?
The flooring is at least Select grade, and some boards may be of a higher grade. It has a clean, consistent look.
How does Go Green's Select grade compare to Clear?
Go Green's product page says its Select grade is similar to the Clear grade specified by NOFMA and NWFA.
Can I order a different grade?
The product page says to call about other grades.
Is grade the same as cut?
No. Grade describes how much character the boards show. Cut describes how the log was sawn.
Plan Your Floor
Choosing flooring for your project? Call 908-232-6600, email joe@hugginsflooring.com or book a virtual consultation. See our rift and quartered white oak, chevron white oak and double herringbone flooring.
About The Author
Joe Avila has worked in wood flooring for 26 years. He is NWFA certified (CSI, CI, CWFI, CFS) and teaches NWFA continuing-education courses for architects, designers and flooring professionals. Go Green Wood Floors, a Huggins Wood Floor Specialist brand.
.png)




Comments