top of page

Herringbone Wood Flooring: A Buyer's Guide

Nov 6
5 min read

Updated: 6 days ago

Coswick herringbone wood floor in American Walnut in a room

Herringbone is one of the oldest and most loved wood floor patterns. Here is what to know before you buy one.

Planning a project? Talk with Joe Avila: call 908-232-6600 or book a virtual consultation.

Herringbone floors have been laid in grand homes for centuries, and they are just as popular in new apartments and family houses today. The pattern adds movement and craftsmanship to a room without needing exotic wood. This guide walks through the choices that decide how a herringbone floor looks, performs and lasts.

How a Herringbone Floor Works

Herringbone wood floor in a room
A herringbone wood floor.

A herringbone floor is made of rectangular pieces with square ends. Each piece meets the next at a right angle, with the end of one piece set against the side of its neighbor, so the rows form a staggered zigzag. Because of the way they lock together, herringbone pieces with tongue-and-groove edges usually come in left and right versions, often labeled A and B. A single herringbone uses one piece in each position, while double or triple herringbone groups two or three pieces side by side for a bolder look.

Choosing a Species

Coswick herringbone wood floor in American Walnut in a room
A Coswick herringbone floor in American Walnut.

White oak is the most popular species for herringbone because it is hard, fairly stable and takes everything from pale natural finishes to dark stains. Red oak herringbone has a warmer, pinker tone and a more open grain, which suits traditional homes. Walnut gives a rich, dark chocolate color, though it is softer and shows dents more easily. Whatever the species, look at a large sample of the actual pieces, because color and grain vary within each species and across the many short pieces in the pattern.

Piece Size and Proportion

Dinesen oak herringbone floor in a room
A Dinesen oak herringbone floor.

The size of each piece changes the scale of the whole floor. Small, narrow pieces create a fine, traditional pattern that suits classic rooms and smaller spaces. Longer and wider pieces make a bolder, more modern statement and can help a large open room feel calm. The length of a herringbone piece is usually several times its width, and that ratio affects how steep and busy the zigzag looks. Ask for a sample panel or a photo of a finished floor in the same size before you order.

Specifying floors for a client or your own home? Book a virtual consultation with Joe Avila.

Solid or Engineered Herringbone

Herringbone wood floor in a room
A herringbone wood floor.

Herringbone is available in both solid and engineered construction. Solid pieces are one piece of wood throughout and can be sanded many times over the life of the floor. Engineered pieces have a real wood wear layer bonded to a stable core, so they move less with seasonal changes in humidity. Engineered herringbone is often the better choice over concrete slabs and radiant heat, and in many apartments. Check the thickness of the wear layer, because it decides how many times the floor can be refinished.

Layout, Borders and Direction

Coswick herringbone wood floor in Chestnut in a room
A Coswick herringbone floor in Chestnut.

A herringbone floor is laid out from a center line, so planning comes first. The installer decides which way the points will run, often along the length of a room or toward the main entrance, and where the pattern will meet doorways and other rooms. Many herringbone floors are framed with a border of straight boards, sometimes in a contrasting color, which gives the pattern a clean edge. Talk through how the floor will flow from room to room before installation starts.

Installation and the Subfloor

Coswick herringbone wood floor in Chambord in a room
A Coswick herringbone floor in Chambord.

Pattern floors take more time and skill to install than straight planks, and they produce more cut-off waste at the walls, so order extra material. The subfloor needs to be flat, clean and dry, because small dips or moisture problems show up quickly in a pattern this precise. Over concrete, the slab should be tested for moisture and the right underlayment or adhesive used. Many herringbone floors are glued down, while others are nailed to a wood subfloor, depending on the product and the building.

Have a question about your own floor? Joe Avila can walk you through it.

Finishing Herringbone

Herringbone wood floor in a room
A herringbone wood floor.

Herringbone can be bought prefinished or installed raw and finished on site. Site finishing lets the whole floor be sanded flat after installation, so every piece sits level, and gives full control over stain color and sheen. Prefinished pieces arrive ready to use and often have a small bevel on each edge, which outlines every piece. Many homeowners choose a matte or satin sheen and a low-VOC waterborne finish or natural oil, which shows off the grain and the pattern without a glossy look.

Quick Answers

What is herringbone wood flooring?

A pattern of rectangular pieces with square ends laid at right angles, with the end of one piece against the side of the next, forming a staggered zigzag.

What is the best wood for herringbone floors?

White oak is the most popular because it is hard, stable and takes many finishes. Red oak gives a warmer look, and walnut gives a rich dark color but is softer.

Is engineered herringbone a good choice?

Yes. Engineered herringbone moves less with humidity and is often the better choice over concrete slabs, radiant heat and in apartments. Check the wear layer thickness first.

How much extra herringbone flooring should I order?

Pattern floors produce more cut-off waste than straight planks, so order extra material. Your installer can work out the amount from the room layout and any borders.

Talk to a Wood Flooring Specialist

Not sure which option fits your project? Call 908-232-6600 (Monday to Friday, 9 a.m. to 6 p.m. Eastern), visit our showroom at 406B West Broad Street in Westfield, New Jersey, or book a virtual consultation. We work with homeowners, architects and designers across New Jersey, New York City and the East Coast, and serve clients nationwide.

About The Author

Joe Avila has 26 years in the wood flooring trade. He is an NWFA-certified wood flooring inspector, installer and sander, and for more than a decade he has taught accredited continuing-education programs for AIA, ASID and IDCEC audiences, training thousands of architects and design professionals in how to specify wood flooring correctly.

Related Reading

Comments


bottom of page