top of page

How to Acclimate Hardwood Flooring Before Installation

Nov 8
5 min read
Coswick wood floor in Alpine in a room

Wood moves with humidity. Letting it adjust to your home first, and checking moisture, prevents gaps and cupping later.

Planning a project? Talk with Joe Avila: call 908-232-6600 or book a virtual consultation.

Wood flooring is a natural material that takes on and gives off moisture as the air around it changes. If boards go down before they match the conditions in your home, they can shrink, swell or cup after installation. Acclimation is the step that gets the wood and the room in balance first, and it is one of the simplest ways to protect a new floor.

Why Wood Needs to Acclimate

Light hardwood floor in a room
A light wood floor.

Every piece of wood holds some moisture, and it keeps adjusting until it matches the humidity of the air around it. A floor that was stored in a cold warehouse or a damp truck will not hold the same moisture as a heated apartment or a newly built house. If it is installed too wet, it can shrink and open gaps as it dries. If it is installed too dry, it can swell, push against walls and cup. Acclimation lets the boards settle toward the conditions they will live in.

Get the Room Ready First

Hardwood floor in a living space
A hardwood floor in a living space.

Acclimation only works if the room is already at normal living conditions. That means windows and doors are in, wet work such as plaster, paint and tile has dried, and the heating or air conditioning is running at the temperature and humidity you plan to keep. Bringing flooring into a space that is still under construction can do more harm than good, because the wood will adjust to conditions that will soon change. Ask your contractor to confirm the space is ready before delivery.

Measuring Moisture, Not Just Counting Days

Maple wood floor in a foyer
A maple floor in a foyer.

Many people hear that flooring should sit in the house for a set number of days, but time alone does not prove the wood is ready. A good installer checks the moisture content of the boards and the subfloor with a moisture meter, and compares the readings. The acceptable gap between them depends on the species and the board width, and wider boards usually need a closer match. Acclimation is finished when the readings say so, not when the calendar does.

Specifying floors for a client or your own home? Book a virtual consultation with Joe Avila.

Solid Hardwood Acclimation

Dark hardwood floor in a room
A dark wood floor.

Solid hardwood moves more with humidity than engineered flooring, so it usually needs the most attention. Boxes are often opened and the boards spread out or stacked with spacers so air can reach them. Wide solid planks are especially sensitive, because each board has more wood to expand and shrink across its width. Rift and quartered boards tend to move less than plainsawn boards, which is one reason they are often chosen for wide floors and for rooms where humidity swings.

Engineered Flooring Acclimation

Coswick wood floor in Milk Chocolate in a room
A Coswick wood floor in Milk Chocolate.

Engineered flooring is built in layers that resist movement, so many manufacturers ask for less acclimation time, or simply require the room to be at normal living conditions before installation. Some products should stay in their sealed boxes until they are installed. Even so, the room itself still has to be finished, dry and running at normal temperature and humidity. Because rules differ from one product to another, always follow the instructions from the maker of the floor you choose. Ignoring them can affect how the floor performs and what the manufacturer will stand behind.

Concrete Slabs and Radiant Heat

Hardwood floor in a living space
A hardwood floor in a living space.

Floors over concrete or radiant heat need extra care. New concrete can hold a lot of moisture for months, so slabs should be tested before any wood goes down, and a moisture barrier is often part of the plan. Radiant heating systems are usually run for a period before installation so the slab is dry and stable, then set to a moderate temperature while the floor is laid. Your installer can tell you what testing and timing your floor and heating system need.

Have a question about your own floor? Joe Avila can walk you through it.

After the Floor Is Installed

Coswick wood floor in a room
A Coswick wood floor.

Acclimation does not end on installation day. Wood keeps responding to the air for its whole life, so it helps to keep indoor humidity in a steady, moderate range all year. Small seasonal gaps in winter are normal for solid wood and usually close again in summer. Large gaps, cupping or crowning point to a moisture problem worth checking. A humidifier in dry months and good ventilation in damp ones go a long way toward keeping your floor flat and tight.

Quick Answers

How long should hardwood flooring acclimate?

There is no single number of days. The wood is ready when moisture readings of the boards and the subfloor are within the range the flooring maker and your installer call for.

Does engineered hardwood need to acclimate?

Usually less than solid wood, and some products should stay sealed until installation. Always follow the manufacturer's instructions for the specific floor.

Should flooring acclimate in the box?

It depends on the product. Solid boards are often opened and spread out so air can reach them, while some engineered floors must stay in sealed boxes. Check the maker's instructions.

What happens if hardwood is not acclimated?

Boards installed too wet can shrink and leave gaps. Boards installed too dry can swell, cup or push against walls. Checking moisture first helps prevent both.

Talk to a Wood Flooring Specialist

Not sure which option fits your project? Call 908-232-6600 (Monday to Friday, 9 a.m. to 6 p.m. Eastern), visit our showroom at 406B West Broad Street in Westfield, New Jersey, or book a virtual consultation. We work with homeowners, architects and designers across New Jersey, New York City and the East Coast, and serve clients nationwide.

About The Author

Joe Avila has 26 years in the wood flooring trade. He is an NWFA-certified wood flooring inspector, installer and sander, and for more than a decade he has taught accredited continuing-education programs for AIA, ASID and IDCEC audiences, training thousands of architects and design professionals in how to specify wood flooring correctly.

Related Reading

Comments


bottom of page