Changing Your Hardwood Floor Color in NJ and NYC: Light to Dark and Back
Updated: 5 days ago
Posted November 12, 2026
How Go Green Wood Floors changes the color of hardwood floors in New Jersey and New York City, from darker browns to pale and grey tones.
Planning a project? Call 908-232-6600 or book a virtual consultation.
Floors that were right for a home years ago do not always suit it today. A honey-toned oak may feel dated next to new cabinets, or a dark floor may show every bit of dust in a bright apartment. The good news is that a solid hardwood floor does not have to stay the color it is.
Go Green Wood Floors changes floor colors for homes across New Jersey and New York City, using zero- and low-VOC oils, lyes and pre-treatments instead of traditional stains. Here is how a color change works, using what our FAQ and color effects pages say.
Yes, You Can Change Direction

The short answer from our FAQ is yes: you can go from light to dark, from dark to light, or anywhere in between. A color change is part of a full sanding and refinishing job. The floors are sanded bare and restored to new-like condition, which removes the old finish and color, and then the new color goes on as part of the finishing system you choose. That is also why a quick screen and recoat cannot change color, as our post on screen and recoat explains. Go Green says it has unlimited color choices, so the question is less whether a color is possible and more which look you want.
Going Darker

Darker floors can feel warm and formal, and they are one of the most common color changes. Go Green's options include Diamond Oil colors such as Chocolat Brun, Color Oils in browns and walnut tones, Single Coat colors such as Cioccolato, and zero-VOC oils such as Noyer. A darker color can also help with an older floor that has dark spots. The FAQ notes that where boards are stained by pets or water, replacing and weaving in new boards is usually the better fix, but choosing a darker color to cover darker portions of the floor is an alternative. A specialist can help you weigh the two during a consultation.
Going Lighter

Going lighter is where pre-treatments come in. Go Green offers lye pre-treatments, including Wood Lye White, Driftwood Lye White and Grey, and Softwood Lye, as well as Pre-Color White and Antique Lye, which go on before the oil. Paired with Extra White or Natural oils, they are used to create pale, Scandinavian-style and whitewashed looks. The Diamond Package, Go Green's Designer and Architect Favorite, is built around these pre-treatments, including lyes, reactive stains and pre-colors, and offers unlimited customizations. See an example in Diamond Oil and White Driftwood Lye.
Want help with your own floor? Book a virtual consultation with a Go Green wood floor specialist.
Grey and Natural Tones

Between light and dark sit grey and natural looks. Go Green's grey options include Diamond Oil in Concrete Grey and Sand Grey, Color Oil in Castle Grey and Extra Grey, and lye treatments such as grey driftwood lye. For a natural look, there are clear and natural oils, and Vermeister ZERO VOC, a water-based finish in matte or satin that does not alter the wood's shade at all. Single Coat colors such as Cemento and Grigio Antico color and protect in one matte coat. If you are not sure which way to go, a neutral or natural tone is often the easiest to live with across several rooms. Browse grey and natural options in our color effects.
Why Samples on Your Own Floor Matter

Each floor takes color differently. Species, the age of the wood, how it was cut and the light in the room all change how a finish looks, so a color that looks right on a sample board can look different on your floor. That is why Go Green lays custom stain samples on your own hardwood floor, so you can see how a color will truly look before the whole floor is finished. Go Green's custom colors are made from aniline dyes and natural plant-based pigments, which allows fine adjustments between samples. Plan to look at samples in both morning and evening light.
What a Color Change Involves

Because a new color means sanding to bare wood, plan for a full refinishing job. With an oil-based finish, refinishing often takes 3 to 4 days plus drying time, and water-based work is often about 2 days, with larger jobs taking longer. Sanding involves dust, which Go Green controls with plastic, vacuuming between coats and a dust extraction system that takes care of 90 to 95 percent of it. Afterward, wait two days before pets walk on the floor and 2 weeks before putting rugs back. Our guide to sanding and refinishing walks through each step.
Have a question about your project? Call 908-232-6600 or book a virtual consultation.
Quick Answers
Can you change the color of a hardwood floor?
Yes. You can go from light to dark, dark to light or anywhere in between as part of sanding and refinishing.
Can a screen and recoat change the floor color?
No. Changing color needs full sanding to bare wood, then a new finish.
How do you make a floor lighter?
Go Green uses lye pre-treatments and pre-colors under white or natural oils to create lighter looks.
Why test color samples on my floor?
Each floor takes color differently, so samples laid on your own floor show how the color will truly look.
Plan Your Floor
Thinking about a new color for your floors? Call 908-232-6600, email joe@hugginsflooring.com or book a virtual consultation. Browse our color effects, sanding and finishing packages and eco-friendly finishes.
About The Author
Joe Avila has worked in wood flooring for 26 years. He is NWFA certified (CSI, CI, CWFI, CFS) and teaches NWFA continuing-education courses for architects, designers and flooring professionals. Go Green Wood Floors, a Huggins Wood Floor Specialist brand.
.png)




Comments